Care And Maintenance; Air Inlet; For Heavy Dust; Water Tank - Sharp DW-D12A Operation Manual

CARE AND
MAINTENANCE

AIR INLET

Once a week
Remove the dust
with vacuum cleaner

FOR HEAVY DUST

1
Pull the plug out of
the socket
(For the sake of safety, be sure
to stop the dehumidifier and
remove the power plug from the
socket.)
2
Wash off the dust from
the net and dry it
(Remove gently with a small brush)
Use mild detergent (dishwashing
soap) in lukewarm water for heavier
dusts.
3
Install the filter as
it was back into
the main unit
16
We recommend periodical cleaning
for a long, clean and sanitary use!
●
●
●
Remove the filter
2.The filter installation completes
when the fastener is clamped in
the main unit.
1.Insert the two hasps of the filter into
the holes on the main unit.

WATER TANK

1
Remove the
water tank cover
Open it slowly from the corner
2
Wash the inside of the tank
3
Dry the tank
with soft cloth
Do not remove the
white foam material
4
Install the water
tank cover
Ensure that the slot around the
water tank cover is embedded
reliably (otherwise water may
leak)
●
Empty the water tank, and
then remove its cover
●
Clean it with a white tableware cloth
●
After use for a long term, water
generated in the dehumidifying
process may become black and
contaminate the water tank. In
this case, clean the water tank
with diluted neutral detergent (for
tableware), and then rinse it with
warm water
17