Recommended Tools; Front Bezel (Optional); Installing The Optional Front Bezel - Dell E33S001 Owner's Manual

Related links

Installing the optional front bezel

Installing the system cover

Recommended tools

You need the following tools to perform the removal and installation procedures:
• Key to the system keylock
• Phillips #2 screwdriver
• Wrist strap
• Plastic scribe

Front bezel (optional)

The front bezel is attached to the front side of the system and prevents accidents while removing the hard drive or when pressing the
reset or power button. The front bezel can also be locked for additional security.
Installing the optional front bezel
Prerequisite
Follow the safety guidelines listed in the Safety instructions section.
Steps
1 Locate and remove the bezel key.
NOTE: The bezel key is attached to the back of the bezel.
2 Hook the right end of the bezel onto the chassis.
3 Fit the free end of the bezel onto the system.
4 Lock the bezel by using the key.
Installing and removing system components 51