Dell E33S001 Owner's Manual page 130

NOTE: If you are using Easy Restore, you do not have to import an existing iDRAC Enterprise license.
6 Ensure that you perform the following steps:
a Use the Easy Restore feature to restore the service tag. See the Restoring the Service Tag by using the Easy Restore feature
section.
b If the service tag is not backed up in the backup flash device, enter the system service tag manually. See the Entering the
system service tag by using System Setup section.
c Update the BIOS and iDRAC versions.
d Re-enable the Trusted Platform Module (TPM). See the Re-enabling the TPM for BitLocker users section.
Related links
Installing the processor
Installing the heat sink
Installing the optional iDRAC port card
Installing the expansion card riser
Installing a memory module
Installing the cooling shroud
Restoring the Service Tag by using the Easy Restore feature
By using the Easy Restore feature, you can restore your Service Tag, license, UEFI configuration, and the system configuration data after
replacing the system board. All data is automatically backed up in a backup flash device. If BIOS detects a new system board and the
Service Tag in the backup flash device, BIOS prompts the user to restore the backup information.
1 Turn on the system.
If BIOS detects a new system board, and if the Service Tag is present in the backup flash device, BIOS displays the Service Tag, the
status of the license, and the UEFI Diagnostics version.
2 Perform one of the following steps:
• Press Y to restore the Service Tag, license, and diagnostics information.
• Press N to navigate to the Dell Lifecycle Controller based restore options.
• Press F10 to restore data from a previously created Hardware Server Profile.
After the restore process is complete, BIOS prompts to restore the system configuration data.
3 Perform one of the following steps:
• Press Y to restore the system configuration data.
• Press N to use the default configuration settings.
After the restore process is complete, the system restarts.
Entering the system Service Tag by using System Setup
If Easy Restore fails to restore the Service Tag, use System Setup to enter the Service Tag.
1 Turn on the system.
2 Press F2 to enter System Setup.
3 Click Service Tag Settings.
4 Enter the Service Tag.
NOTE: You can enter the Service Tag only when the Service Tag field is empty. Ensure that you enter the correct Service
Tag. After the Service Tag is entered, it cannot be updated or changed.
5 Click Ok.
6 Import your new or existing iDRAC Enterprise license.
For more information, see the Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.
130 Installing and removing system components