Table 11. iDRAC Direct LED indicator patterns
iDRAC Direct LED
indicator pattern
Solid green for two seconds Indicates that the laptop is connected.
Flashing green (on for two
seconds and off for two
seconds)
Turns off
Cabled power supply unit indicator codes
Press the self-diagnostic button to perform a quick health check on the cabled power supply unit (PSU) of the system.
Figure 10. Cabled AC PSU status indicator and self-diagnostic button
1
self-diagnostic button
Table 12. Non-redundant AC PSU status indicator
Power Indicator Pattern
Not lit
Green
Locating Service Tag of your system
Your system is identified by a unique Express Service Code and Service Tag number. The Express Service Code is and Service Tag are
found on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on the chassis of the
system. This information is used by Dell to route support calls to the appropriate personnel.
Your system is identified by a unique Express Service Code and Service Tag number. The Express Service Code is and Service Tag are
found on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on the chassis of the
system. This information is used by Dell to route support calls to the appropriate personnel.
Condition
Indicates that the laptop connected is recognized.
Indicates that the laptop is unplugged.
Condition
Power is not connected or PSU is faulty.
A valid power source is connected to the PSU and the PSU is operational.
2
AC PSU status indicator
About the PowerEdge R230 systems
21