This chapter presents the physical characteristics of the DLT VS80 subsystem: internal and external
size, electrical requirements, communication interface, and mean time between failures (MTBF). This
chapter also shows mounting hole locations on the internal unit, giving dimensions from both a bottom
and a side view
2.1
Physical Specification
This section describes the tape drive size, electrical requirements, communication interface, and
MTBF.
Table 2-1
Table 2-1. Physical Specifications
Unit
Internal
External
001597-01 Rev. A09
Chapter 2
lists the size, weight, and orientation of internal and external units.
Parameter
Height
Width
Length
Weight
Shipping weight
Orientation
Height
Width
Physical Specification
Value
43.82 mm (1.725 in.) with bezel
41.70 mm (1.625 in.) without bezel
146.05 mm (5.750 in.) behind bezel
148.18 mm (5.834 in.) with bezel
216.14 mm (8.509 in.) measured from back of front bezel
220.96 mm (8.699 in.) including the bezel
1.45 kg (3.2 lbs)
2.08 kg (4.59 lbs) depending on configuration
Horizontal, Vertical (2-sides)
66.24 mm (2.608 in.)
212.13 mm (8.352 in.)
May 2004
C
2
HAPTER
2-1