This chapter describes the safety specifications of the DLT VS160 tape drive.
9.1
Safety Requirement
The tape drive meets the following standards:
• Low Voltage Directive (73/23/EEC)
• UL 1950: 1995 – US Standard: Safety of Information Technology Equipment including Electrical
Business Equipment
• CSA C22.2 #950 – Canadian Standard: Safety of Information Technology Equipment including
Electrical Business Equipment
• EN 60950/A11: 1997 – European Standard: Safety of Information Technology Equipment
including Electrical Business Equipment
• IEC 60950/A4: 1996 – International Standard: Safety of Information Technology Equipment
including Electrical Business Equipment
9.2
Consumer Bulletin Scheme
The tape drive meets this scheme: CB Scheme – The Scheme of the IECEE for Mutual Recognition of
Test Certificates for Electrical Equipment.
81-81275-01 REV A02
Safety Specifications
Chapter 9
September 2004
C
9
HAPTER
9-1