Unload Button Functions; Table 3-4. Unload Button Functions - Quantum DLT VS160 Product Specification

Unload Button Functions

3.2 Unload Button Functions
You can use the unload button to unload and eject data cartridges, and for the additional features
shown in the following table. Press and hold the eject button for the time specified in the following
table to activate one of these features. Release the button when the LEDs display the desired sequence.
C
AUTION

Table 3-4. Unload Button Functions

Normal unload function
Reserved
Enter code load tape mode
Reserved
Reserved
Revert back to normal mode
Read/write diagnostic start.
CAUTION: This feature overwrites any
data currently on the data cartridge.
Reserved.
CAUTION: This feature overwrites any
data currently on the data cartridge.
Emergency Reset
Revert back to normal mode
Key
– Off
Blinking
3-4
The two features noted in the following table will over-write
any data on the data cartridge. Do not use these features if the
data cartridge in the tape drive contains critical data.
Description
Fault
Ready
(orange or
(green)
clear)
–
–
– –
On (orange or green)
Unchanged from previous condition
September 2004
DLT VS160 Product Specification
Clean Media
(orange or (orange or
clear) clear)
– –
– –
–
– –
– –
–
– –
81-81275-01 REV A02
Hold Time
(seconds)
0 to 6
6 to 9
9 to 12
12 to 15
15 to 18
18 to 21
21 to 24
24 to 27
27 to 30
30+