DLT VS160 Product Specification
8.2.7 Voltage Dips, Short Interruptions, and Variations
Immunity
The tape drive meets the AC dips, interruptions, and variations immunity limits per
EN 61000–4–11: 1994 listed in
Table 8-13. Voltage Dips, Short Interruptions, and Variations Immunity Limits
95% Vreduction 10 milliseconds per 0.5 periods
30% Vreduction 500 ms per 25 periods
95% Vreduction 5 sec per 250 periods
8.3
Voltage Fluctuations and Flicker Limits
The tape drive meets this standard: EN 61000–3–3: 1995, Limitation of voltage fluctuations and
flicker in low-voltage supply systems for equipment with rated current up to and including 16A.
Table 8-14
Table 8-14. Voltage Fluctuations and Flicker Limits
P
st
<1.0
8.4
Direct Current (DC) Magnetic Field Interference
The tape drive meets the following standards:
• IATA Dangerous Goods Regulations, 30th Edition, 1989–01–01
• U.S. CFR 49, paragraph 173.1020, rev. date: 1983–11–01
81-81275-01 REV A02
Table
Specification
(Dips)
(Dips)
(Interruptions)
lists the EN 61000–3–3: 1995 Fluctuation and Flickers limits.
P
lt
<0.65
8-13.
Soft recoverable errors allowed
Operator intervention allowed
Operator intervention allowed
d
(%)
c
<3.0
September 2004
Chapter 8: Emission and Immunity Specifications
Performance Criteria
d
(%)
max
<4.0
d(t)ms
<200
8-7