ZyXEL Communications HD User Manual page 98

Figure 63 Configuration > Object > User > Setting
The following table describes the labels in this screen.
Table 42 Configuration > Object > User > Setting
LABEL
User Default Setting
Default Authentication
Timeout Settings
Edit
#
User Type
Lease Time
Reauthentication Time
User Logon Settings
Chapter 9 User
DESCRIPTION
These authentication timeout settings are used by default when you create a new
user account. They also control the settings for any existing user accounts that are
set to use the default settings. You can still manually configure any user account's
authentication timeout settings.
Double-click an entry or select it and click Edit to open a screen where you can
modify the entry's settings.
This field is a sequential value, and it is not associated with a specific entry.
These are the kinds of user account the NWA/WAC supports.
• admin - this user can look at and change the configuration of the NWA/WAC
• limited-admin - this user can look at the configuration of the NWA/WAC but not
to change it
• user - this is used for embedded RADIUS server and SNMPv3 user access
This is the default lease time in minutes for each type of user account. It defines the
number of minutes the user has to renew the current session before the user is
logged out.
Admin users renew the session every time the main screen refreshes in the Web
Configurator.
This is the default reauthentication time in minutes for each type of user account. It
defines the number of minutes the user can be logged into the NWA/WAC in one
session before having to log in again. Unlike Lease Time, the user has no opportunity
to renew the session without logging out.
NWA / WAC Series User's Guide
98