We value your experience using Sunny Health and Fitness products. For assistance with parts
or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 3
Connect the Pulse Connecting
Wire
2
Connecting Wire 3 (No. 25).
Lock the Rear Support Tube (No.
3) to the Main Frame (No. 1) with 2
Hex Socket Pan Head Screws
(No. 36), 4 Flat Washers (No. 35)
and 2 Nylon Nuts (No. 37) with the
Spanner
Wrench (No. 87). Then cover with
2 Caps (No. 90)
Note: Do not damage any wires
when locking the Rear Support
Tube (No. 3) to the Main Frame
(No. 1).
STEP 4
Remove
Screws (No. 27) and 6 Flat
Washers (No. 35) from the Slide
Rail (No. 4) using the Allen
Wrench (No. 87). Then lock the
Slide Rail (No. 4) to the Rear
Support Tube (No. 3) and the
Main Frame (No. 1) with 6 Screws
(No. 27) and 6 Flat Washers (No.
35) that were just removed using
the Allen Wrench (No. 87).
Remove 2 Screws (No. 40) from
the Adjustment Handle (No. 8)
using the Allen Wrench (No. 89),
then lock the Adjustment Handle
(No. 8) to the Adjustment Block
Axle (No. 7) with 2 Screws (No.
40) using the Allen Wrench (No.
89).
7
(No.
24)
and
Pulse
(No.
88)
and
Allen
the
preassembled
6