Table of Contents
Advertisement
We value your experience using Sunny Health and Fitness products. For assistance with parts
or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 7
Remove the preassembled 4 Screws
(No. 32) from the Meter (No. 92) using
the Spanner (No. 88).
Connect the Sensor Connecting Wire
(No. 22) and Pulse Connecting Wire
1 (No. 23) to the relative wires of
Meter (No. 92), then lock the Meter
(No. 92) to the bracket of Handlebar
Post (No. 2) using 4 Screws (No. 32)
that were just removed with the
Spanner (No. 88).
Note: To avoid damaging the wires,
please push them into the Handlebar
Post (No. 2) before secure the Meter
(No. 92) onto the bracket.
THE ASSEMBLY IS COMPLETE!
9
Advertisement
Table of Contents
