Table of Contents
Advertisement
WHEEL AND TIRE TORQUE SPECIFICATIONS
Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to
the vehicle. Any time a wheel has been removed
and reinstalled on the vehicle, the lug nuts/
bolts should be torqued using a properly cali-
brated torque wrench using a high quality six
sided (hex) deep wall socket.
Torque Specifications
Lug Nut/Bolt
**Lug Nut/
Torque
Bolt Size
89 Ft-Lbs
M12 x 1.25 x
(120 N·m)
25.5
**Use only authorized dealer recommended
lug nuts/bolts and clean or remove any dirt or
oil before tightening.
Inspect the wheel mounting surface prior to
mounting the tire and remove any corrosion or
loose particles.
Wheel Mounting Surface
Tighten the lug nuts/bolts in a star pattern until
Lug Nut/
each nut/bolt has been tightened twice.
Bolt Socket
Size
17 mm
Torque Patterns
TECHNICAL SPECIFICATIONS
After 25 miles (40 km) check the lug nut/bolt
torque to be sure that all the lug nuts/bolts are
properly seated against the wheel.
WARNING!
To avoid the risk of forcing the vehicle off the
jack, do not tighten the lug nuts/bolts fully
until the vehicle has been lowered. Failure to
follow this warning may result in personal
injury.
FUEL REQUIREMENTS
1.3L Turbo Engine
This engine is designed to meet all
emission regulations and provide
satisfactory fuel economy and perfor-
mance when using high-quality
unleaded "regular" gasoline having an octane
rating of 87 using the (R+M)/2 method. For
optimum performance and fuel economy the
use of 91 octane or higher is recommended.
275
8
Advertisement
Table of Contents
