When the "Blind Spot Assist" feature is selected, the Blind Spot Monitor (BSM) system is activated and shows a visual alert in the outside mirrors, or it

shows a visual alert in the outside mirrors and sounds an audible alert when the turn signal is on. When "Off" is selected, the BSM system is deactivated.

If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged, the sensor may have become

misaligned. Take your vehicle to an authorized dealer to verify sensor alignment. A sensor that is misaligned results in the BSM not operating to specifi-

cation.

Rear View Camera Delay

NOTE:

The "Rear View Camera Delay" setting determines whether or not the screen displays the rear view image with dynamic grid lines for up to 10 seconds

after the vehicle is shifted out of REVERSE. This delay is canceled if the vehicle's speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK,

or the ignition is switched to the OFF position.

Active Rear View Camera

Guidelines

NOTE:

The "Active Rear View Camera Guidelines" feature overlays the Rear View Camera image with active, or dynamic, grid lines to help illustrate the width of

the vehicle and its projected backup path, based on the steering wheel position when the option is checked. A dashed center line overlay indicates the

center of the vehicle to assist with parking or aligning to a hitch/receiver.

Rain Sensing Wipers — If Equipped

Selectable Options

Off

Lights

Off

MULTIMEDIA

287

Lights + Chime

Table of Contents