Full Brake Control System With Mitigation - Fiat 500X 2020 Owner's Manual

100 SAFETY
Blind Spot Monitoring Fault Warnings
Blinded Sensor
In the case of a blinded sensor:
BSM Mirror Warning Lights are turned on

continuously.
An instrument cluster message will display

"Blind Spot Monitoring Unavailable - Wipe Rear
Bumper Corners."
NOTE:
The rear bumper must be clean and free of any
obstructing debris.
System Not Available
In the case of the system being temporarily
unavailable:
BSM Mirror Warning Lights are turned on

continuously.
An instrument cluster message will display

"Blind Spot Monitoring Temporarily Unavailable."
In the case of the system being completely
unavailable:
A chime will turn on.

An instrument cluster message will display

"Blind Spot Monitoring Unavailable - Service
Required."
NOTE:
Vehicle must be taken to the nearest authorized
dealer for service.
General Information
The following regulatory statement applies to all
Radio Frequency (RF) devices equipped in this
vehicle:
This device complies with Part 15 of the FCC
Rules and with Innovation, Science and
Economic Development Canada license-exempt
RSS standard(s). Operation is subject to the
following two conditions:
1. This device may not cause harmful interfer-
ence, and
2. This device must accept any interference
received, including interference that may
cause undesired operation.
Le présent appareil est conforme aux CNR
d`Innovation, Science and Economic Develop-
ment applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux
conditions suivantes:
1. l'appareil ne doit pas produire de brouil-
lage, et
2. l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d'en comprom-
ettre le fonctionnement.
La operación de este equipo está sujeta a las
siguientes dos condiciones:
1. es posible que este equipo o dispositivo no
cause interferencia perjudicial y
2. este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que
pueda causar su operación no deseada.
NOTE:
Changes or modifications not expressly approved
by the party responsible for compliance could
void the user's authority to operate the equip-
ment.

Full Brake Control System With Mitigation

The Full Brake Control System with Mitigation
provides the driver with audible warnings, visual
warnings (within the instrument cluster display),
and may apply a brake jerk to warn the driver
when it detects a potential frontal collision. The
warnings and limited braking are intended to
provide the driver with enough time to react,
avoid or mitigate the potential collision.