Maico WS 320 Series Quick Start Manual page 20

8.4 Temperature
The main temperatures
for your living areas can
be seen at a glance.
Set the desired room
temperature* here.
The air temperatures
measured in the ventila-
tion unit are displayed
here too.
* Setpoint temperature can
only be set if auxiliary
heating is connected.
8.5 Humidity
Set the desired humid-
ity range to suit your
physical comfort here.
A dehumidification of
the living areas takes
place if the maximum
value is exceeded ‒ the
ventilation unit switches
to intensive ventilation.
In the case of unsuitable
outside air that is too
humid (summer storms),
the intelligent control de-
activates the dehumidifi-
cation through intensive
ventilation.
8.6 Sensors,
CO / VOC optional
2
You can see instantly
whether the air quality
in certain rooms is
optimum or not.
When Auto Sensor ope-
rating mode is activat-
ed, the ventilation unit
switches to a higher
ventilation level when
loaded. You can also
adjust the ventilation
level manually.
20