Operating With The Simple Control Unit - Maico WS 320 Series Quick Start Manual

4 Operating components/
instructions
For the user
Simple control unit
App-Store (iOS)
App 
Play Store (Android)
WebTool software*
Operating instructions* Important information
For the specialist installer
Installation instructions included in the scope
Commissioning and
maintenance instruc-
tions*
Commissioning
software*
List incomplete / * www.maico-ventilatoren.com
5 Switching ventilation unit
on and off
On/off with main switch
Trio
units using mains fuse in fuse box.
To put units into standby on the control unit,
select the Off ventilation level.
6 Operating with the simple
control unit
The simple control unit (RLS 1 WR)
can be used to manually set the ven-
tilation levels. LEDs show the ventila-
tion level selected, an imminent filter
change or a fault.
In ventilation level II (nominal ventilation), the
ventilation unit switches to automatic mode*
(Auto Sensor operating mode). Automatic
mode ensures hygienically perfect ventilation
using the measured humidity values and/or
the CO /5VOC air quality values determined
2
with external sensors.
* Setting can be changed by the installer.
14
included in the scope
of delivery.
for smartphone/tablet
software for PC/note-
book not linked to a
specific browser
for the operator
of delivery.
Information about
settings and
parameters
Settings software
for PC/notebook
Flat
, for and
Level Designation
III Intensive ventilation (continuous operati-
on). LED lll on..
III Pulse ventilation: Intensive ventilation
with timer. LED III flashes. The unit swit-
ches back to nominal ventilation once
the time interval has elapsed.
II Nominal ventilation (continuous ope-
ration): LED II on. Unit running in Auto
Sensor operating mode.
I Reduced ventilation (continuous operati-
on). LED I on.
I Ventilation for humidity protection: LED
I flashes. Preservation of building using
interval ventilation:
13 min. on – 17 min. off – 13 min. on ...
0 Off (Standby)
Button functions
I-III
Increase ventilation level using  key,
decrease using  key.
Fault/ Acknowledge filter change:
Press  key and  key simultaneously for
three seconds.
Notes / Fault indication
Filter change display: LED II flashes.
Fault: All 3 LEDs flashes.
7 Operating with smartphone
1. Scan the QR code with your smartphone or
tablet  App-Store (iOS) / Play Store
(Android).
2. Load the app onto your device.
3. Launch the
appears.
iOS
Activating for your smartphone
When logging in, call up Register and give us
your contact details and the serial number of
your ventilation unit. Your access details will
app. The Log in screen
Android