StarTech.com TB3DK2DPM2 User Manual page 11

icon.
3. Wait ten seconds and then remove the SD Card from the Docking
Station by gently pulling it out of the SD Card Reader Slot.
Caution! If you remove the SD Card before it is safe to do so, you
could experience lost or corrupted data on your memory card.
3.5 mm Microphone Port
1. Connect a 3.5 mm Audio Cable to the 3.5 mm Microphone Port on the
Docking Station.
2. Connect the other end of the 3.5 mm Audio Cable to your Microphone.
3.5 mm Audio Output Port
1. Connect the 3.5 mm Audio Cable from your Speakers, Headphones, etc. to
the 3.5 mm Audio Output Port on the Docking Station.
Rear Ports
USB-A Port
The USB-A port on the rear of the Docking Station can be used to connect
compatible USB devices. These ports can be used to connect media devices
(External Media Drive) or can be used to connect peripheral devices for use with
the connected Host (e.g. Keyboard, Mouse, Web Camera, etc.).
The USB-A (5Gbps) Fast-Charge and Sync Port on the rear panel of the Docking
Station is compliant with USB Battery Charging Specification Revision 1.2 (BC
1.2), which means that you can use the USB-A (5Gbps) Port to connect and
charge a device faster than you can using a traditional standard USB 3.0 port.
1. Connect a USB-A cable to the USB-A port on the rear of the Docking Station.
2. Connect the other end of the USB-A cable to a USB port on your compatible
device.
Ethernet Port
1. Connect a CAT5e/CAT6 cable's RJ-45 connector to the Ethernet Port on the
rear side of the Docking Station.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6