Pinout And Signal Information - National Instruments NI-5752B Getting Started Manual

Device Front Panel Connector
NI 5752
AI 0-15 AI 16-31
CLK
IN
16 DO
2 DI
Caution
connected to the NI 5752/5752B before powering down the module, and connect
signals only after the adapter module has been powered on by the FlexRIO FPGA
module or controller for FlexRIO.
Caution
the NI 5752/5752B can damage the device and the chassis. NI is not liable for any
damage resulting from such connections.

Pinout and Signal Information

The following figure shows the pinout for the analog input VHDCI front panel connector.
8 | ni.com | NI 5752/5752B Getting Started Guide
AI 0-15 Analog input channels AI 0+/AI 0- through
AI 15+/AI 15-
AI 16-31 Analog input channels AI 16+/AI 16- through
AI 31+/AI 31-
CLK IN External Sample Clock input
DIO 0-15 Digital input and output terminals
To avoid permanent damage to the NI 5752/5752B, disconnect all signals
Connections that exceed any of the maximum ratings of any connector on
Description