430
7-3. Do-it-yourself maintenance
Exterior
■
Make sure that the 12-volt battery terminals are not corroded and
that there are no loose connections, cracks, or loose clamps.
Terminals
1
Hold-down clamp
2
Installing the 12-volt battery cover
■
Install the 12-volt battery
1
cover.
Guides
1
Clips
2
Check if the clips and guides
on the back of the cover are
engaging properly if the cover
cannot be installed.
Install the 2 clips.
2
Push out the center part of
1
the clips
Insert the clips
2
Push in the center part of
3
the clips
■
Before recharging
When recharging, the 12-volt battery produces hydrogen gas which is flam-
mable and explosive. Therefore, observe the following precautions before
recharging:
●
If recharging with the 12-volt battery installed on the vehicle, be sure to dis-
connect the ground cable.
●
Make sure the power switch on the charger is off when connecting and dis-
connecting the charger cables to the 12-volt battery.
PRIUS c_U