Toyota PRIUS C 2019 Manual page 191

Check that the "READY" indicator is illuminated.
5
If the "READY" indicator changes from a flashing light to a solid light and a
beep sound, the hybrid system is starting normally.
The vehicle will not move when the "READY" indicator is off.
The vehicle can move when the "READY" indicator is on even if the engine
is stopped. (The engine starts or stops automatically in accordance with
the state of the vehicle.)
Stopping the hybrid system
Stop the vehicle completely.
1
Set the parking brake (P. 205), and shift the shift lever to P.
2
Press the power switch.
3
Release the brake pedal and check that
4
mation display is off.
Changing power switch modes
Modes can be changed by pressing the power switch with brake pedal
released. (The mode changes each time the switch is pressed.)
*
Off
1
The emergency flashers can be
used.
ACCESSORY mode
2
Some electrical components such
as the power outlet can be used.
will be displayed on the
multi-information display.
ON mode
3
All electrical components can be
used.
will be displayed on the
multi-information display.
*
: If the shift lever is in a position other than P when turning off the hybrid sys-
tem, the power switch will be turned to ACCESSORY mode, not to off.
PRIUS c_U
4-2. Driving procedures
on the multi-infor-
191
4