Toyota PRIUS C 2019 Manual page 248

248
4-5. Toyota Safety Sense C
■
Temporarily lowering sensor sensitivity
The sensitivity of the sensor can be temporarily lowered.
Vehicles without a smart key system: Turn the power switch off while the
1
following conditions are met.
Vehicles with a smart key system: Turn the power switch off while the fol-
lowing conditions are met
• The headlight switch is in
• The headlight switch lever is in high beam position.
• Automatic High Beam switch is on.
Vehicles without a smart key system: Turn the power switch to the "ON"
2
position.
Vehicles with a smart key system: Turn the power switch to ON mode.
Within 60 seconds after
3
original position then pushing it to the high beam position quickly 10 times,
then leave the lever in high beam position.
If the sensitivity is changed, the Automatic High Beam indicator is turn on
4
and off 3 times.
Automatic High Beam (headlights) may turn on even the vehicle is stopped.
PRIUS c_U
.
, repeat pulling the headlight switch lever to the
2