Toyota PRIUS C 2019 Manual page 132

132
3-2. Opening, closing and locking the doors
■
Switching the door unlock function (vehicles with a smart key system)
It is possible to set which doors the entry function unlocks using the wireless
remote control.
Turn the power switch off.
1
When the indicator light on the key surface is not on, press and hold
2
or for about 5 seconds while pressing and holding
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step 2.)
Holding the driver's door handle
unlocks only the driver's door.
Holding the front passenger's door
handle unlocks all the doors.
Holding either front door handle
unlocks all the doors.
■
Conditions affecting the operation of the smart key system or wireless
remote control
Vehicles without a smart key system

The wireless remote control function may not operate normally in the follow-
ing situations:
●
When the wireless key battery is depleted
●
Near a TV tower, electric power plant, gas station, radio station, large dis-
play, airport or other facility that generates strong radio waves or electrical
noise
●
When carrying a portable radio, cellular phone or other wireless communi-
cation device
●
When the wireless key is in contact with, or is covered by a metallic object
●
When other wireless keys (that emits radio waves) are being used nearby
●
If window tint with a metallic content or metallic objects are attached to the
rear window
Vehicles with a smart key system

P. 141
■
Customization that can be configured at Toyota dealer
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features: P. 558)
PRIUS c_U
Unlocking doors Beep
Exterior: Beeps 3 times
Interior: Beeps once
Exterior: Beeps twice
Interior: Beeps once
.