Toyota PRIUS C 2019 Manual page 325

Auto connection
To turn auto connection mode on, set "Bluetooth
(P. 327)
When you register a phone, auto connection will be activated. Always
set it to this mode and leave the Bluetooth
connection can be established.
When the power switch is turned to the "ACC" or "ON" position (vehicles
without a smart key system) or the power switch is turned to ACCESSORY
or ON mode (vehicles with a smart key system), the system will search for
a nearby cellular phone you have registered.
Next, the system automatically connects with the most recent of the
phones connected to in the past. Then, the connection result is displayed.
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Manual connection
When auto connection has failed or "Bluetooth
you must connect the Bluetooth
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Follow the steps in "Connecting a Bluetooth
1
1". (P. 324)
Connecting a Bluetooth
Registering an additional device

Select "Select Device" on the Bluetooth
1
For more information: P. 322
2
Selecting a registered device

Select "Select Device" on the Bluetooth
1
For more information: P. 324
2
■
Reconnecting a Bluetooth
If the system cannot connect due to poor signal strength with the power
switch is turned to the "ACC" or "ON" position (vehicles without a smart key
system) or the power switch is turned to ACCESSORY or ON mode (vehicles
with a smart key system), the system will automatically attempt to reconnect.
If the system is attempting to connect to a Bluetooth
®
Bluetooth phone is turned off and then back on, the system will attempt to
reconnect.
PRIUS c_U
5-8. Connecting Bluetooth
®
device manually.
®
audio player
®
phone
®
(Multimedia system)
*
Power" to on.
®
phone in a place where a
*
Power" is turned off,
®
device" from "STEP
®
audio control screen.
®
audio control screen.
®
phone and the
325
5