Toyota PRIUS C 2019 Manual page 227

WARNING
● If water droplets cannot be properly removed from the area of the wind-
shield in front of the front sensor by the windshield wipers, replace the
wiper insert or wiper blade.
If the wiper inserts or wiper blades need to be replaced, contact your
Toyota dealer.
●
Do not attach window tint to the windshield.
●
Replace the windshield if it is damaged or cracked.
If the windshield needs to be replaced, contact your Toyota dealer.
●
Do not get the front sensor wet.
● Do not allow bright lights to shine into the front sensor.
●
Do not dirty or damage the front sensor.
When cleaning the inside of the windshield, do not allow glass cleaner to
contact the lens. Also, do not touch the lens.
If the lens is dirty or damaged, contact your Toyota dealer.
● Do not subject the front sensor to a strong impact.
●
Do not change the installation position or direction of the front sensor or
remove it.
● Do not disassemble the front sensor.
●
Do not modify any components of the vehicle around the front sensor
(inside rear view mirror, etc.) or ceiling.
●
Do not attach any accessories that may obstruct the front sensor to the
hood, front grille or front bumper. Contact your Toyota dealer for details.
●
If a surfboard or other long object is to be mounted on the roof, make sure
that it will not obstruct the front sensor.
●
Do not modify the headlights or other lights.
●
Do not attach anything to or place anything on the dashboard.
■
Installation area of front sensor on windshield
When the windshield is fogging up easily, the glass around the front sensor
may be hot due to the heater running. If the glass is touched, it may result in
burns.
PRIUS c_U
4-5. Toyota Safety Sense C
227
4