Toyota PRIUS C 2019 Manual page 163

■
When the window cannot be opened or closed (driver's window only)
When the jam protection function or catch protection function operates
unusually and the door window cannot be opened or closed, perform the fol-
lowing operations with the power window switch on the driver's door.
●
Stop the vehicle. With the power switch in the "ON" position
*
2
mode , within 4 seconds of the jam protection function or catch protection
function activating, continuously operate the power window switch in the
one-touch closing direction or one-touch opening direction so that the door
window can be opened and closed.
●
If the door window cannot be opened and closed even when performing the
above operations, perform the following procedure for function initialization.
Turn the power switch to the "ON" position
1
Pull and hold the power window switch in the one-touch closing direction
2
and completely close the door window.
Release the power window switch for a moment, resume pulling the
3
switch in the one-touch closing direction, and hold it there for approxi-
mately 6 seconds or more.
Press and hold the power window switch in the one-touch opening direc-
4
tion. After the door window is completely opened, continue holding the
switch for an additional 1 second or more.
Release the power window switch for a moment, resume pushing the
5
switch in the one-touch opening direction, and hold it there for approxi-
mately 4 seconds or more.
Pull and hold the power window switch in the one-touch closing direction
6
again. After the door window is completely closed, continue holding the
switch for a further 1 second or more.
If you release the switch while the window is moving, start again from the
beginning.
If the window reverses and cannot be fully closed or opened, have the vehicle
inspected by your Toyota dealer.
*
1
: Vehicles without a smart key system
*
2
: Vehicles with a smart key system
PRIUS c_U
3-5. Opening and closing the windows
*
1
or ON mode
163
*
1
or ON
*
2
.
3