The Temperature Reading Is Not Accurate; How Can I Manually Pair Sensors; Can I Use My Bluetooth Sensor With My Watch; My Headphones Will Not Connect To The Watch - Garmin FORERUNNER 965 Owner's Manual

The temperature reading is not accurate

Your body temperature affects the temperature reading for the internal temperature sensor. To get the most
accurate temperature reading, you should remove the watch from your wrist and wait 20 to 30 minutes.
You can also use an optional tempe external temperature sensor to view accurate ambient temperature
readings while wearing the watch.

How can I manually pair sensors?

The first time you connect a wireless sensor to your watch using ANT+ or Bluetooth technology, you must pair
the watch and sensor. If the sensor has both ANT+ and Bluetooth technology, Garmin recommends that you
pair using ANT+ technology. After they are paired, the watch connects to the sensor automatically when you
start an activity and the sensor is active and within range.
1 Bring the watch within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other wireless sensors while pairing.
2 If you are pairing a heart rate monitor, put on the heart rate monitor.
The heart rate monitor does not send or receive data until you put it on.
3 Hold .
4 Select Sensors & Accessories > Add New.
5 Select an option:
• Select Search All.
• Select your sensor type.
After the sensor is paired with your watch, the sensor status changes from Searching to Connected. Sensor
data appears in the data screen loop or a custom data field.

Can I use my Bluetooth sensor with my watch?

The watch is compatible with some Bluetooth sensors. The first time you connect a sensor to your Garmin
watch, you must pair the watch and sensor. After they are paired, the watch connects to the sensor
automatically when you start an activity and the sensor is active and within range.
1 Hold .
2 Select Sensors & Accessories > Add New.
3 Select an option:
• Select Search All.
• Select your sensor type.
You can customize the optional data fields

My headphones will not connect to the watch

If your Bluetooth headphones were previously connected to your phone, they may connect to your phone
automatically instead of connecting to your watch. You can try these tips.
• Turn off Bluetooth technology on your phone.
Refer to the owner's manual for your phone for more information.
• Stay 10 m (33 ft.) away from your phone while connecting your headphones to your watch.
• Pair your headphones with your watch
124
(Customizing the Data Screens,
(Connecting Bluetooth Headphones,
page 105).
page 90).
Troubleshooting