Changing the DND Settings
See "Using Do-Not-Disturb (DND)" on
To turn on DND using Remote Programming:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your passcode followed by #. See
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
To turn off DND using Remote Programming:
Changing the Manual Call Forwarding Settings
See "Manual Call Forwarding" on
To turn on Manual Call Forwarding using Remote Programming:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your passcode followed by #. See
5. Dial one of the following Call Forwarding feature codes:
6. Enter either an extension number or 8 followed by a phone number.
To turn off Call Forwarding using Remote Programming:
Mitel
®
8528 Telephone User Guide – Release 6.2, June 2016
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
Use any phone on the system.
passcode for your extension.
text (if applicable).
Follow steps 1. through 4. above, and then dial 371.
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
Use any phone on the system.
passcode for your extension.
355 (All)
356 (No answer)
357 (Busy)
358 (No Answer/Busy)
Dial 355, and then hang up.
page 57
for more information about using DND.
page 48
for details on setting up a station
page 36
for more information about Manual Call Forwarding.
page 48
for details on setting up a station
Call Features
Page 53