Safety Instructions; Warranty - M&C LC Series Instruction Manual

Gas and liquid cooler
Table of Contents

Advertisement

3

Safety instructions

Follow these basic safety procedures when mounting, commissioning or operating this equipment:
These instruction manual points out the basic dangers when handling the cooler. Further system-related
hazards may occur in individual cases, which the operator must evaluate according to his hazard
assessment - and take appropriate measures.
Read the instruction manual before commissioning and use. The notes and warnings in the operating
instructions must be complied with.
When connecting the cooler, ensure that the correct pressure ranges are used in accordance with the type
plate specifications or technical data.
Before opening the cooler, it must be depressurized. This also applies to any external connections that may
be connected.
Only use the cooler within the permissible temperature and pressure ranges. The permissible temperature
and pressure ranges are described in the corresponding technical data.
Ensure that the device is installed in a weather-protected location. Do not expose directly to rain or liquids.
The cooler must not be operated in potentially explosive atmospheres; The cooler must only be operated
with sample gas according to the analysis questionnaire.
The cooler must not be operated in potentially explosive atmospheres; The cooler must only be operated
with sample gas according to the analysis questionnaire.
If the cooler is used to cool gases that are harmful to health, appropriate safety measures must be taken in
the event of leaks (e.g. leaking connections). The personal protective equipment must be adapted to the
hazards at the place of installation and sampling.
The cooler must be adequately protected against corrosive influences, shocks and impacts to prevent
leakage and component failure.
Inlets and outlets of the cooler must be provided with protective plugs. This measure is necessary to protect
the interior from corrosion and to prevent the escape of residual liquid or the ingress of foreign bodies.
Only gases which cannot react with each other or with the material of the cooler or the connections in any
form can be cooled in the cooler.
4

Warranty

If the equipment fails, please contact M&C directly or else go through your M&C authorised dealer.
We offer a one year warranty as of the day of delivery as per our normal terms and conditions of sale, and
assuming technically correct operation of the unit. Consumables are hereby excluded. The terms of the warranty
cover repair at the factory at no cost or the replacement at no cost of the equipment free ex user location.
Reshipments must be sent in a sufficient and proper protective packaging.
www.mc-techgroup.com
LC, LG, LT | 1.00.01
5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LC Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Lg seriesLt seriesLgc-1Lgc-1sLgt-2Lc-1 ... Show all

Table of Contents