Removing The Pcie Card From Riser - Dell PowerEdge XR8620t Installation And Service Manual

Figure 44. Installing the expansion card riser 2
Next steps
Install the 2U floor on the 1U

Removing the PCIe card from Riser

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. Remove the air shroud.
4. Remove the M.2 direct riser
5. Remove the side cover
Steps
1. Using both hands, hold the PCIe card by the edges and pull the card away from the riser slot.
node.
Safety instructions.
Before working inside your system.
Installing and removing system components 75