Dell PowerEdge XR8620t Installation And Service Manual page 38

Table 44. NVMe-oF SubSystem Settings (continued)
Option
DHCP
Host IP Address
Host Subnet Mask
Host Gateway
NVMe-oF Subsystem info via DHCP
NVMe-oF Subsystem NQN
NVMe-oF Subsystem Address
NVMe-oF Subsystem Port
NVMe-oF Subsystem NID
NVMe-oF Subsystem Controller ID
Security
Authentication Type
SecuritykeyPath
Integrated Devices
To view the Integrated Devices screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Integrated Devices.
Table 45. Integrated Devices details
Option
User Accessible USB Ports
iDRAC Direct USB Port
Embedded NIC1 and NIC2
I/OAT DMA Engine
Embedded Video Controller
38 Pre-operating system management applications
Description
Enables and disables the DHCP for this NVMe-oF connection. This option is set to
Disabled by default.
Specifies the Host IP Address for this NVMe-oF connection.
Specifies the Host Subnet Mask for this NVMe-oF connection.
Specifies the Host Gateway for this NVMe-oF connection.
Enables and disables the NVMe-oF subsystem's DHCP for this connection. This
option is set to Disabled by default.
Specifies the NVMe-oF subsystem's NQN for this connection.
Specifies the NVMe-oF subsystem's IP address for this connection.
Specifies the NVMe-oF subsystem's port for this connection. This option is set to
4420 by default.
Specifies the NamespaceID (NID) for this NVMe-oF connection.
Specifies the NVMe-oF subsystem's Controller ID for this connection. This option
is set to 0 by default.
Enables or disables the security option for this NVMe-oF connection. This option is
set to Disabled by default.
Specifies the authentication type for this NVMe-oF connection. This option is set
to None by default.
Specifies the SecuritykeyPath for this NVMe-oF connection.
Description
Configures the user accessible USB ports. Selecting All Ports Off disables all
USB ports. ; Selecting All Ports Off (Dynamic) disables all USB ports during
POST. Front ports can be enabled or disabled dynamically by authorized users
without resetting the system. This option is set to All Ports On by default.
The USB keyboard and mouse still function in certain USB ports during the
boot process, depending on the selection. After the boot process is complete,
the USB ports will be enabled or disabled as per the setting.
The iDRAC Direct USB port is managed by iDRAC exclusively with no host
visibility. This option is set to ON or OFF. When set to OFF, iDRAC does not
detect any USB devices installed in this managed port. This option is set to On
by default.
Enables or disables the Embedded NIC1 and NIC2. If set to Disabled (OS),
the NIC may still be available for shared network access by the embedded
management controller. This option is set to Enabled by default.
Enables or disables the I/O Acceleration Technology (I/OAT) option. I/OAT is
a set of DMA features designed to accelerate network traffic and lower CPU
utilization. Enable only if the hardware and software support the feature. This
option is set to Disabled by default.
Enables or disables the use of Embedded Video Controller as the primary
display. When set to Enabled, the Embedded Video Controller will be the