Installing The 2U Floor On The 1U Node - Dell PowerEdge XR8620t Installation And Service Manual

Figure 26. Removing the 2U floor from the 1U node
Next steps
Replace the 2U floor on the 1U sled.

Installing the 2U floor on the 1U node

Prerequisites
1. Follow the safety guidelines listed in Safety Instructions.
2. Follow the procedure listed in Before working inside your system.
Steps
1. Align the 2U floor horizontally and place it on top of the 1U node.
CAUTION: Support the 2U floor with both hands while placing it on the 1U node.
2. Using the Phillips 1 screwdriver, tighten the screws on two sides of the system that secure the 2U floor on the 1U node.
Installing and removing system components 61