Certification; Standards Compliance; Agency Approvals - Siemens RUGGEDCOM RSG2100 Installation Manual

RUGGEDCOM RSG2100
Installation Guide

Certification

The RUGGEDCOM RSG2100 device has been thoroughly tested to guarantee its conformance with recognized
standards and has received approval from recognized regulatory agencies.
• Section 6.1, "Standards Compliance"
• Section 6.2, "Agency Approvals"
• Section 6.3, "EMC and Environmental Type Tests"
Section 6.1

Standards Compliance

The RUGGEDCOM RSG2100 complies with the following standards:
• FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference on his own expense.
• Industry Canada Compliance
CAN ICES-3 (A) / NMB-3 (A)
• Other
▪ IEC 61000-6-2 (Generic Industrial)
▪ NEMA TS-2 (Traffic Control Equipment)
▪ IEEE 1613 (Electric Utility Substations)
▪ IEC 61850-3 (Electric Utility Substations)
▪ EN 50121-4 (Railway Equipment)
Section 6.2

Agency Approvals

Agency
CSA
CE
FCC
Standards Compliance
Standards
CSA C22.2 No. 60950-1, UL 60950-1
EN 60950-1, EN 61000-6-2, EN
60825-1, EN 55022 Class A, EN 50581
FCC Part 15, Class A
Chapter 6
Certification
Comments
Approved
Approved
Approved
41