Restoring A Nuisance Channel; Using The Hang Up Box (Hub); Call Alert Paging; Receiving A Call Alert Page - Motorola APX MOBILE O9 User Manual

Hide thumbs Also See for APX MOBILE O9:
Table of Contents

Advertisement

2.5.5

Restoring a Nuisance Channel

Procedure:
To restore the deleted nuisance channel, perform one of the following actions:
Stop and restart a scan.
Mode change to another channel and back to the original channel.
Turn off the radio and then turn it on again.
Nuisance mode delete can be disabled by the system administrator.
2.5.6

Using the Hang Up Box (HUB)

Procedure:
1 To temporarily suspend Scan Mode operation, remove the microphone from the Hang Up Box
(HUB).
You are allowed to use the control head while scan is suspended. However, Priority Member
scanning is not suspended. This feature applies to all Scan Lists and Scan Types. Scan is
resumed once the control head is returned to the holding clip and the preprogrammed hang time
has elapsed.
NOTICE: Priority Scan List members are continuously scanned only when the Scan List,
Designated Tx Member field is set to "Talkback" in the radio programming. Otherwise,
all scan mode operation is suspended.
2.6

Call Alert Paging

This feature allows your radio to work like a pager.
If other users are away from their radios or if they are unable to hear their radios, you can send them
an individual call alert page. You can also verify if a radio is active on the system.
Depending on how your radio is programmed, if there is no answer after the maximum ring time or
when you press the PTT button for an Enhanced Private Call, the radio automatically sends a call alert
page.
NOTICE: This feature must be preprogrammed by a qualified radio technician.
2.6.1

Receiving a Call Alert Page

When and where to use: When you receive a Call Alert page, you hear four repeating alert tones and
the LED blinks green. If Call Alert Tone Auto Reset is enabled, you hear one alert tone and the LED
blinks green. The call received icons blinks and the display shows Page received.
Procedure:
Press the PTT button to answer or press any button to clear the Call Alert page.
See
Making a Talkgroup Call on page 46
information on returning the call.
or
Making a Private Call (Trunking Only) on page 47
68007024014-GK
Advanced Features
for more
67

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 7500Apx 8500

Table of Contents