Phone Call Displays And Alerts - Motorola APX MOBILE O9 User Manual

68007024014-GK
Status Indicators
You Hear Tone Name
Received Individual
Call
Call Alert Sent
Site Trunking
Short, High- Low-Battery Chirp
Pitched
Tone
(Chirp)
Two High- GPS Fails
Pitched
Tones
Ringing Fast Ringing
Enhanced Call Sent
Phone Call Received
Gurgle Dynamic Regrouping
Talk Permit
Unique, New Message
Low-Pitch-
ed Chirp
Unique, Priority Status
High-Pitch-
ed Chirp

Phone Call Displays and Alerts

The following phone call displays and alerts appears on the radio display when you make and receive
Phone calls. The radio also uses alert tones to indicate the current status.
You Hear You See
A Long No phone
Tone
Phone
busy
A Busy Phone
Tone busy
– No ac-
knowledge
40
Heard
When Call Alert or Private Call is received.
When Call Alert is received by the target radio.
When a SmartZone trunking system fails.
When battery is below preset threshold value.
When the GPS fails or loses signal.
When system is searching for target of Private Call.
When waiting for target of Private Call to answer the
call.
When a land-to-mobile phone call is received.
(When PTT button is pressed) a dynamic ID has been
received.
(When PTT button is pressed) is verifying with the sys-
tem for accepting its transmissions.
When a new message is received.
When a priority message is received.
When
You press the PTT
button and the phone
system is not availa-
ble.
The phone system is
busy.
When a channel is not
available.
The call is not ac-
knowledged.
Notes
Press to hang up. The radio re-
turns to the Home screen.
Press to exit the phone mode and
try your call later.
The radio automatically connects
when a channel opens.
Press to hang up. The radio re-
turns to the Home screen.