Connecting The Controller Unit To The Management Hosts - Bosch E2800 Installation Manual

DSA E-Series (E2800 60-bay)
Switch topology
5.3

Connecting the controller unit to the management hosts

The management host directly manages storage arrays over an out-of-band network. This
section describes how to set up an out-of-band connection between the Ethernet port of a
controller unit and the management host.
To set up an out-of-band connection:
1.
2.
Bosch Security Systems B.V.
1
Switch
1 Switch
3 Controller B - iSCSI host ports (RJ45
Base‑T)
Note: Optionally, use the optical host
interface ports.
Connect Ethernet cables between port 1 of controller A and port 1 of controller B to an
external Ethernet switch or hub.
Connect the management host to the Ethernet switch or hub.
2 3
2
Installation manual
Connection | en
Controller A - iSCSI host interface
ports (RJ45 Base‑T)
Note: Optionally, use the optical host
interface ports.
29
2021.05 | V3 | DOC