Table of Contents
Advertisement
18
en | System overview
10
The LED status of the drives are indicated as follows:
–
–
–
3.2.6
LEDs on the power canister
The power canister has LEDs and its own power switch and power outlet. Each 60-bay
controller unit and 60-bay expansion unit contains two power canisters.
The following table describes the LEDs and their operational states:
LED icon
3.2.7
LEDs on the fan canister
The fan canister has an Attention LED that is identified by a sideways exclamation point in the
middle of the canister. Each 60-bay controller unit and 60-expansion unit has two fan
canisters, one on either side of the enclosure.
2021.05 | V3 | DOC
0
Attention/Locate drive LED 0
2
Attention/Locate drive LED 2
4
Attention/Locate drive LED 4
6
Attention/Locate drive LED 6
8
Attention/Locate drive LED 8
Attention/Locate drive LED 10
Amber: The drive in the drawer requires operator attention.
Off: The drive in the drawer is operating normally.
Blinking: A locate operation for the drive is in progress.
1
1
Power LED
LED name
Power
Attention
1
3
5
7
9
11
2
2
Status indicator
Steady green
Off
Steady amber
Installation manual
DSA E-Series (E2800 60-bay)
Attention/Locate drive LED 1
Attention/Locate drive LED 3
Attention/Locate drive LED 5
Attention/Locate drive LED 7
Attention/Locate drive LED 9
Attention/Locate drive LED 11
Attention LED
Description
The power supply is functioning
correctly.
The power supply failed, the AC switch
is turned off, the AC power cord is not
properly installed, or the AC power cord
input voltage is not within margin (there
is a problem at the source end of the AC
power cord).
The power supply or its integrated fan
has a fault.
Bosch Security Systems B.V.
Advertisement
Table of Contents
