Bosch E2800 Installation Manual page 22

22 en | Installation
3.
4.
2021.05 | V3 | DOC
– Repeat this step for the right rail.
1
2
Place the back of the unit (the end with the connectors) on the rails.
Caution: An empty unit weighs approximately 60 kg (132 lbs). Four persons are required
to safely move an empty unit. A fully loaded unit weighs approximately 113 kg (250 lbs). A
mechanical lift is required to safely move the unit.
Carefully slide the unit all the way onto the rails.
Note: If applicable, you might need to remove the end caps or the system bezel to secure
the unit to the rack post. Replace the system bezel when you are done.
Note: Do not place additional equipment on the rails after you finish installing the unit.
The rails are not designed to bear additional weight.
Installation manual
DSA E-Series (E2800 60-bay)
1
2
Bosch Security Systems B.V.