Table of Contents
Advertisement
34
en | Configuring the storage system
7
Configuring the storage system
This chapter describes the basic configuration of the storage system using the Configuration
Manager program.
To get a basic configuration, do the following steps:
1.
2.
3.
Starting the Configuration Manager program
To start the Configuration Manager program:
4
Adding the device to the system
To add iSCSI devices to the system:
1.
2.
3.
4.
5.
Creating a basic configuration
To create a basic configuration:
1.
2.
3.
4.
5.
6.
7.
8.
9.
2021.05 | V3 | DOC
Start the Configuration Manager program.
Add the device to the system.
Create a basic configuration.
Double-click the the Configuration Manager icon on the desktop.
On the navigation bar, click the Network Scan
Note: The Configuration Manager program scans the network for compatible devices and
displays the decoder in the tree structure.
In the tree structure, right-click a device, then click Add to System....
The Add Device to System dialog box appears.
Enter the name of the group or select the name from the list if you want to assign the
device to a group.
Note: You can also continue without selecting or creating a group.
Click OK.
The device is added to the system.
Click the My Devices
On the navigation bar, click the My Devices
In the tree structure, click the corresponding device, click Pool x, click Storage Systems,
then click the storage system.
In the view pane, click the Basic configuration tab. The basic configuration settings of the
storage system appear.
Enter the basic settings of your storage system.
Click Initialize. An information message box appears.
Click Yes to confirm that you want to go on with the basic configuration. The Basic
Configuration for the iSCSI system dialog box appears.
Note: The dialog box shows the status of the configuration process.
Click the Status tab to display the status of the configuration process.
Click the Details tab to display details about all processes.
Click Close to close the dialog box.
Click the Reload
In the tree structure, right-click the storage system, then click LUN Assignment.... The
LUN Assignment dialog box appears.
Note: If multiple iSCSI ports are used, distribute the LUNs equally among the logical
iSCSI targets. Do not assign one LUN to multiple logical iSCSI targets.
tab to display the device in the tree structure.
icon.
Installation manual
DSA E-Series (E2800 60-bay)
tab.
tab.
Bosch Security Systems B.V.
Advertisement
Table of Contents
