Washing With Multi-Component Detergent; Correcting Entry; Aborting A Programme - V-ZUG AW V6000 Operating Instructions Manual

5 Operating the appliance
5.12

Washing with multi-component detergent

To start Bio or Soap wash, «Multi-component detergent» must be enabled in the user set-
tings (see page 30). Ensure the alkaline detergent or soap detergent are added to the
correct compartment (see page 17).
▸ Touch the button for the desired pro-
60
gramme.
▸ Touch the button.
– The selection of washing detergents
appears in the TouchDisplay.
▸ Touch the desired washing detergent.
Bio wash
▸ Touch the button.
– The programme selected starts.
5.13

Correcting entry

During programme selection, entries can be corrected as follows:
Clearing entries in the current view
▸ Touch the button.
– Entries will be cancelled. The previous TouchDisplay appears.
Clearing all entries
▸ Touch the button repeatedly until the TouchDisplay goes dark.
– All entries are cleared.
5.14

Aborting a programme

Once a programme has started, only the spin speed can be changed. For any
other changes, the programme must be aborted.
▸ Touch the button repeatedly until «Draining» is displayed. This part of the
programme cannot be skipped and will be carried out in full.
22
Select wash detergent
Standard with pre-wash
Soap wash Bio wash