V-ZUG Adora L Installation Instructions Manual
Hide thumbs
Also See for Adora L:
- Operating instructions manual (84 pages) ,
- Operating instructions manual (36 pages) ,
- Installation instructions manual (9 pages)
Table of Contents
Advertisement
Quick Links
Installation instructions
Washing machine
One-family household
For Service and Spare Part Information please contact: V-ZUG AUSTRALIA Pty. Ltd. Tel +61 7 3209 6822
The appliance should be installed by qualified personnel only.
Each step must be carried out and checked in full in the order specified.
Validity
These installation instructions apply to the models: L (11010), S (11011), SL (11012), SLQ (11013), SLQ WP (11014)
Identification plate
1
Transport
If the weight of the appliance is greater than your lifting capacity, the appliance must be transported by several
people or using a transport aid. The weight of the appliance is given on the appliance packaging and in the operating
instructions.
Transport the appliance in an upright position only! Transporting it in any other position will cause damage. When
carried carefully without being shaken, the appliance may be tilted a maximum of 90° to the right (viewed from the
front).
Applicable only to model SLQ WP:
In the event that the appliance is tilted during transportation or installation it must not be put into operation for 2
hours.
Installation accessories supplied
The necessary installation accessories are located in the washing drum and in the appliance packaging.
Designation
Installation set, incl.:
▪ Rubber stopper
▪ Screw material
▪ External drain hose
▪ Wire hose clamp
▪ Hose support
Installation plate (incl. double-sided
adhesive tape)
1014123-R03
▸
Open the drain tray below the appliance door (see «1. Opening
the appliance door»)
– Identification plate 1
Article no.
Number
W41152
1
2
1
1
1
1
W40653
1
1
1014123-R03
31/10/2017
See installation step
2. Removing the transport lock
5. Plumbing in
5. Plumbing in
5. Plumbing in
4. Positioning the installation plate
Advertisement
Table of Contents
Related Manuals for V-ZUG Adora L
Summary of Contents for V-ZUG Adora L
- Page 1 Washing machine One-family household 1014123-R03 For Service and Spare Part Information please contact: V-ZUG AUSTRALIA Pty. Ltd. Tel +61 7 3209 6822 The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order specified.
- Page 2 1014123-R03 Installation instructions 31/10/2017 Washing machine One-family household 1014123-R03 1. Opening the appliance door (without power) 1a Open drain tray A by Remove liquid-detergent 2 Fold drain tray A pressing it at the flap B from detergent dis- right down and re- bottom.
- Page 3 1014123-R03 Installation instructions 31/10/2017 Washing machine One-family household 1014123-R03 3. Dimensions The stated dimensions do not include distances from walls. To prevent disturbing noise and vibration the appliances must not come into contact with the surrounding walls of their installation location. All models 1 Cold water connection, (42)
- Page 4 ▸ In order to keep the distance to the wall, fold out the spacers D on the installation plate. If an appliance with the V-ZUG-Home option is to be installed: ▸ Connect network cable to the appliance. Dimensions 45 and 555 only apply if no plumbing fittings are to be installed behind the appliance.
- Page 5 1014123-R03 Installation instructions 31/10/2017 Washing machine One-family household 1014123-R03 5. Levelling To ensure fault-free operation, the appliance must stand level with all 4 feet firmly on the installation plate and not wobble. ▸ Roughly adjust the height of the front and rear adjuster feet us- ing wrench S (socket wrench 10).
- Page 6 1014123-R03 Installation instructions 31/10/2017 Washing machine One-family household 1014123-R03 7. Electrical connections Electrical connections Electrical connections must be carried out by qualified personnel in accordance with the guidelines and standards for low-voltage installations and the specifications of the local electricity supply companies. A plug-in appliance may only be connected to a socket outlet with earthing contact, installed according to specifications.
- Page 7 1014123-R03 Installation instructions 31/10/2017 Washing machine One-family household 1014123-R03 8. Using for the first time Work steps which do not have to be taken are marked as follows: – Perform stability check Strong vibrations are deliberately produced during the stability check in order to check that the appliance is standing firmly on the ground.
Need help?
Do you have a question about the Adora L and is the answer not in the manual?
Questions and answers