V-ZUG AW V6000 Operating Instructions Manual page 40

11 Trouble-shooting
Problem
The consumption
values for Eco-
Management dis-
played are too
high.
The programme
takes significantly
longer than indic-
ated.
11.3 Unsatisfactory wash results
Result
White residue on
washing
40
Possible cause
▪ The values can vary ac-
cording to programme,
load, additional func-
tions and user settings.
▪ System-related fluctu-
ations cannot be ruled
out.
The programme times
given serve only as a
guide. The duration can be
extended by, for example,
the following factors:
▪ Inlet water is very cold.
Heating is extended.
▪ Washing detergent
dosage is too high.
▪ Too unbalanced a load
during the intermediate
spin.
▪ Flow of inlet water is
low.
▪ There are deposits or
fluff build-ups in the
draining system or for-
eign body trap.
Possible cause
▪ Despite intensive rins-
ing, badly soluble com-
pounds in the detergent
can be left on the wash-
ing.
Solution
▸ Observe the user settings and addi-
tional functions.
▸ Further information can be found in
the section on «Consumption val-
ues» (see page 44).
▸ No action is necessary.
▸ Reduce the amount of washing de-
tergent used next time.
▸ Adjust detergent dosage to the wa-
ter hardness (see page 18).
▸ Follow the trouble-shooting solution
for error message A5 (see page 36).
▸ No action is necessary.
▸ Follow the trouble-shooting solution
for error message A2 (see page 36).
Solution
▸ Shake out or brush the wash items.
▸ Wash the items again with just a little
washing detergent.
▸ Use a liquid detergent that does not
contain zeolites.
▸ Select the «Black garments» textile
programme.