TOHATSU MFS 4C Owner's Manual page 32

MFS4-5-6C_EUR_EN_141119N.book 32 ページ ２０１４年１２月６日 土曜日 午後７時４２分
32
ENGINE OPERATION
ENOW00032-B
CAUTION
Do not try to c ra n k af te r e ngi n e ha s
started.
This model is provided with start in gear
protection.
ENON00010-0
Note
Start-in-gear protection prevents engine
from starting at other than neutral shift. In-
gear starting of engine will move the boat
immediately, potentially leading to falling
down or causing passenger(s) to be thrown
overboard.
Tiller handle type
1. Be sure to install the stop switch lock
to the stop switch, and attach the stop
7
switch lanyard securely to the operator
or to the operator's PFD (Personal Flo-
tation Device.)
1. Stop switch lock
2. Set the control lever in the Neutral
position.
1
ENOF00210-0 ENOF00430-A
N
(R) (F)
1
ENOF00438-0
1. Shift lever
3. Set the throttle grip to START position.
1
1. Throttle grip
4. Set the control lever in the Neutral
position.
N
1
(R) (F)
2
1. Shift lever
2. Choke knob
3. Throttle grip
4. SLOW
5. HIGH
5. Pull the choke knob fully.
ENON00501-0
Note
Choke is not necessary when the engine is
warm. Set the throttle grip to "RE-START"
position.
ENON00502-0
Note
If engine does not start with 4 or 5 times
starting operation, push the knob back and
restart.
ENOF01107-0
4
5
3
ENOF00431-0