Crestron Connected Support; Setting Up Crestron Connected Support - Epson EB-810E User Manual

Crestron Connected Support

If you are using the Crestron Connected network monitoring and control
system, you can set up your projector for use on the system. Crestron
Connected lets you control and monitor your projector using a Web browser.
• You cannot use the Message Broadcasting feature in Epson Projector
Management when you use Crestron Connected.
a
• If you set the Standby Mode setting to Communication On in the
projector's Operation menu, you can control the projector even if
the projector is in standby mode (when the power is off).
For additional information on Crestron Connected, visit the Crestron Web
site.
https://www.crestron.com/
To monitor devices in the system, you can use Crestron RoomView Express
or Crestron Fusion provided by Crestron. You can communicate with the
help desk and send emergency messages. See the following Web site for
details.
http://www.crestron.com/getroomview
To monitor or control your projector and other various devices over a
network, you can use Crestron XiO Cloud. You can manage multiple devices
from one location. See the following Web site for details.
https://www.crestron.com/Products/Featured-Solutions/XiO-Cloud
This manual describes how to perform operations on your computer using a
Web browser.
g g Related Links
• "Setting Up Crestron Connected Support"

Setting Up Crestron Connected Support

To set up your projector for monitoring and control using a Crestron
Connected system, make sure your computer and projector are connected to
the network.
If you are connecting wirelessly, connect to devices over a wireless network
access point.
p.172
a Press the [Menu] button, select the Network menu, and press [Enter].
b Select Network Settings and press [Enter].
c Select the Projector Control menu and press [Enter].
d Set the Crestron Connected setting to On to allow the projector to be
detected.
• If no password has been set, a screen prompting you to set a
password is displayed before you can set Crestron Connected
to On. Follow the on-screen instructions to set the password.
a
• To enable the Crestron XiO Cloud service, set Crestron XiO
Cloud to On.
e When you finish selecting settings, go back to the Network Settings
screen, select Set, and follow the on-screen instructions to save your
settings and exit the menus.
172