Epson EB-810E User Manual page 194

Projector Administration Settings - Management Menu
Setting Options
Light Source Run Now
Calibration
Run Periodically
Last Run
Date & Time Date & Time
Daylight Saving
Time
Internet Time
Schedule Settings —
Wireless LAN On
Power
Off
Wireless LAN Ping
Diagnosis
IP Address
Ping until stopped
Start
Log Save Internal Memory
Destination
USB and Internal
Memory
Description
Starts light source calibration to optimize
the white balance of the currently
projected image. You may not be able to
start calibration if the projector's
environmental temperature is out of
range. (Wait 30 minutes after turning on
the projector before starting calibration
for the best results.)
Set to On to perform light source
calibration periodically every 100 hours
of usage.
Displays the date and time of the last
light source calibration.
Adjusts the projector's system time and
date settings. Select Daylight Saving
Time to set daylight saving time settings
for your region. Select Internet Time to
automatically acquire the time from an
Internet time server.
Schedules projector events to occur
automatically at selected dates and times.
Set to On to project images via a wireless
LAN. If you do not want to connect via
wireless LAN, turn it off to prevent
unauthorized access by others.
Transmits Ping to confirm
communication status.
Sets the location in which to save error
and operation log files.
Setting is only displayed when Content
Playback is set to Off in the projector's
Operation menu.
Setting Options
Batch Setup Range All
Limited
Language Various languages
available
Information Various
information
Display Status System
Version
Network Wired
Network Wireless
Input Signal
Output Signal
Display Logs Temp Warning
Info
Power On/Off
History
Reset Management —
Settings
When you set Menu Protection of Schedule to On, you cannot change
settings on the Schedule Settings. Set Menu Protection of Schedule to
Off first.
a
194
Description
Select All to copy all of the projector
menu settings using the batch setup
feature. Select Limited, if you do not
want to copy the following settings:
• Password Protection settings
• EDID in the Signal I/O menu
• Network menu settings
Select the language for projector menu
and message displays.
Displays information about the projector
and input sources. The displayed items
vary depending on the current input
source.
Displays the projector's status
information.
Displays log data saved to the location
specified in the Log Save Destination
setting.
Resets all adjustment values on the
Management menu to their default
settings, except for the following:
• User Pattern
• Language