Input Signal Settings - Signal I/O Menu - Epson EB-810E User Manual

Input Signal Settings - Signal I/O Menu

Setting Options
HDR10 Setting
HLG Setting
Reset to Defaults —
EDID EDID (HDMI1)
EDID (HDMI2)
EDID (HDBaseT)
HDMI IN EQ Level HDMI1
HDMI2
Description
Changes the PQ (Perceptual Quantizer)
curve of the dynamic range using the
HDR PQ method.
This setting is only displayed when
Dynamic Range is set to Auto and
Signal Status is HDR10, or when
Dynamic Range is set to HDR10.
Changes the HLG (Hybrid Log Gamma)
curve of the dynamic range using the
HDR HLG method.
This setting is only displayed when
Dynamic Range is set to Auto and
Signal Status is HLG, or when Dynamic
Range is set to HLG.
Resets all settings for current input
source.
Describes the display capabilities of your
projector. Change this setting as
necessary according to the resolution of
the image.
You can select the EDID settings for
individual input sources without
changing the input source.
Adjusts the HDMI input signal level
depending on the devices connected to
the HDMI port. If there is a lot of
interference in the image, or if a problem
such as no image being projected occurs,
change the setting.
You can select the settings for individual
input sources without changing the input
source.
Setting Options
A/V Output While Projecting
Always On
Inverse Audio On
Off
HDMI Link Device
Connections
HDMI Link
Audio Out Device
Power On Link
184
Description
Set to Always On to output audio and
images to external devices when the
projector does not project any images.
Setting is only displayed in the following
cases:
• Auto Power On is set to HDMI1 and
Power On Trigger is set to Plug-in
Detection.
• Quick Startup is set to Off in the
projector's Operation menu.
• Auto Power On is set to Off in the
projector's Network menu.
s Network > Transmitter Settings >
Auto Power On
Set to On to invert the audio's left and
right channels to match the projector
installation position.
Lists the devices connected to the HDMI
ports.
Setting is only displayed when HDMI
Link is set to On.
Set to On to enable the HDMI Link
features.
Selects whether to output audio from the
internal speakers or a connected
audio/video system.
Controls what happens when you turn
on the projector or connected device.
• Bidirectional: automatically turns on
the connected device when you turn on
the projector, and vice versa.
• Device -> PJ: automatically turns on
the projector when you turn on the
connected device.
• PJ -> Device: automatically turns on
the connected device when you turn on
the projector.