Table of Contents
Advertisement
Projector Monitoring and Control Options
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has turned
on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and returns a
":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
You can check the available commands and cable layouts in the projector's
Specifications.
ESC/VP.net Commands
You can monitor the projector using ESC/VP.net commands.
When the Command Communication setting is set to Protected, you can
connect the projector with version 2.0 using Web Control Password.
When the Command Communication setting is set to Compatible, you can
connect the projector with version 2.0 or 1.0. Use Monitor Password for
version 1.0. You can set Monitor Password in Epson Web Control.
Network > Network Configuration > Others > Command
s
Communication
You can check the available commands and port number in the projector's
Specifications.
PJLink
PJLink was established by the JBMIA (Japan Business Machine and
Information System Industries Association) as a standard protocol for
controlling network-compatible projector's as part of their efforts to
standardize projector control protocols.
The projector complies with the PJLink Class2 standard established by the
JBMIA.
The port number used for the PJLink search function is 4352 (UDP).
You need to make network settings before you can use PJLink.
Network > Network Configuration > Basic > PJLink Password
s
Network > Network Configuration > Notifications > PJLink
s
Notification
Network > Network Configuration > Others > PJLink
s
It complies with all commands except for the following commands defined by
PJLink Class2, and agreement was confirmed by the PJLink standard
adaptability verification.
Non-compatible commands:
Function
Mute settings
Image muting set
Audio muting set
http://pjlink.jbmia.or.jp/english/
You can check the additional information on the PJLink support in the
projector's Specifications.
Art-Net
Art-Net is an Ethernet communication protocol based on the TCP/IP
protocol. You can control the projector by using a DMX controller or an
application system.
You can check the channel definitions used to control the projector in the
projector's Specifications.
Crestron Connected Support
If you are using the Crestron Connected network monitoring and control
system, you can set up your projector for use on the system. Crestron
Connected lets you control and monitor your projector using a Web browser.
126
PJLink command
AVMT 11
AVMT 21
Advertisement
Table of Contents
