Table of Contents
Advertisement
4. Type the projector's IP address into the browser's address box and press the computer's Enter key
(if you are entering an IPv6 address, wrap the address with [ and ]).
Note: You can find the projector's IP address in the projector's Network menu or on the LAN input
screen.
5. Enter the user name and password at the prompts.
6. Select Advanced.
Note: If you attempt to connect to the Web Control screen via a proxy server, the screen will not be
displayed. Make a direct connection to the Web Control screen.
You see the Web Control screen.
7. Select Interactive > Mail > Address Book File and browse for the address book file.
8. Select the address book file and select Send.
The address book file is uploaded to the projector.
Note: If you need to delete the address book, select Interactive > Mail > Address Book Settings >
Delete Address Book and select Execute.
Parent topic:
Using Crestron Connected
If you are using the Crestron Connected network monitoring and control system, you can set up your
projector for use on the system. Crestron Connected lets you control and monitor your projector using a
web browser.
Note: You cannot use the Message Broadcasting feature in the Epson Projector Management software
when you use Crestron Connected.
For additional information on Crestron Connected, contact Crestron.
Setting Up Crestron Connected
Controlling a Networked Projector Using Crestron Connected
Parent topic:
Using the Projector on a Network
Using the Projector on a Network
95
Advertisement
Table of Contents
