Table of Contents
Advertisement
Introduction
1.1
On the Operating Instructions
Purpose of the Operating Instructions
These Operating Instructions support you when commissioning networks with the Industrial
Ethernet switches of the SCALANCE X‑100 product group.
Validity of the Operating Instructions
These Operating Instructions apply to the following devices:
● SCALANCE X104‑2
● SCALANCE X106‑1
● SCALANCE X108
● SCALANCE X108PoE
● SCALANCE X112-2
● SCALANCE X116
● SCALANCE X124
Unless mentioned otherwise, the descriptions in these operating instructions refer to all devices
of the SCALANCE X-100 product group named above in the section on validity. If information
applies to a specific device, the device name is used, e.g. SCALANCE X104‑2.
See also
SIMATIC NET Industrial TP and FO networks
view/en/1172207)
https://siemens.com/scalance (https://siemens.com/scalance)
Further documentation
In the system manuals "Industrial Ethernet / PROFINET Industrial Ethernet" and "Industrial
Ethernet / PROFINET passive network components", you will find information on other
SIMATIC NET products that you can operate along with the devices of this product line in an
Industrial Ethernet network.
There, you will find among other things optical performance data of the communications partner
that you require for the installation.
SCALANCE X-100
Operating Instructions, 02/2019, A2B00060666-10
(https://support.automation.siemens.com/WW/
1
5
Advertisement
Table of Contents
