Table of Contents
Advertisement
Connecting up
6.5 IE FC RJ-45 Plug 180
Plugging in the IE FC RJ45 Plug 180
Plug the IE FC RJ45 Plug 180 into the twisted-pair port of the device until it locks in place.
Figure 6-2
With its tight fit and locking mechanism with the PROFINET-compliant male connector
IE FC RJ45 Plug 180, the securing collar on the TP port of the device ensures a rugged node
attachment that provides strain and bending relief for the RJ-45 jack.
Pulling the IE FC RJ45 Plug 180
Press on the locking lever of the IE FC RJ45 Plug 180 gently to remove the plug.
If there is not enough space to release the lock with your hand, you can also use a 2.5 mm
screwdriver. You can then remove the IE FC RJ45 Plug 180 from the RJ-45 jack.
40
Plugging in the IE FC RJ45 Plug 180
Operating Instructions, 02/2019, A2B00060666-10
SCALANCE X-100
Advertisement
Table of Contents
