Table of Contents
Advertisement
2). Adjust the focus level to obtain a perfect image on the
monitor.
Please do not remove the lens cap until you finish the
installation to avoid the scrape and dust during the installation
and wiring.
6. Adjust the camera angle to the optimal surveillance angle.
3). Loosen the tilt adjust screw to adjust the tilt angle [0 °~±45°].
4). Loosen the pan adjust screw to adjust the pan angle [0°~360°].
5). Tighten the screws.
Figure 2-7
For the camera equipped with the auto iris, it is suggested you
change the iris mode to manual from the camera menu
(accessed via web browser), and re-change it back to auto iris
after you adjust the focus by the focus lever.
Network Box Camera·Quick Start Guide
Adjust the Surveillance Angle
0°~90°
0°~360°
20
Advertisement
Table of Contents
